|
BonaX 32 oz Hardwood Floor Refresher Directions: 1. Remove and Loose Dirt and Grit from your floor. Clean Thoroughly with BonaX Swedish Formula Hardwood Floor Cleaner and the BonaX Microfiber microplus mop. 2. Using the BonaX Refresher applicator apply the refresher to the floor. Work on a small section at a time, about 4'x6'. 3. Spread over entire section making sure all wood is covered. For best results, apply a thin, consistent coat. 4. Smooth out Refresher, going with the grain of the wood. Continue the process until the entire floor is coated. 5. Allow 1 hour before walking on coated floor. If desired, a second coat may be applied after 2 hours. NOTE: Avoid heavy traffic and replacement of furniture and rugs for 24 hours after final coat. Coverage: approximately 500 square feet per quart Clean-up: clean tools with soap and water Regular Maintenance:
Use Bona X Swedish Formula Hardwood Cleaner and the Bona x microplus mop.
|
|